Delta 3D Printer Build and other Engineering stuff

Since I have learnt so much from others on the the web I though I would share my printer build and other related 3D stuff in the hope it might help someone else. Thanks for looking

Sunday, 15 November 2015

Long time coming but here's an update.

Being so busy at work and having another 3D printer at my disposal the delta has taken a bit of a back seat but with the holidays coming aro...

Wednesday, 14 January 2015

Bolt hobbing and finishing the Extruder

The Infill 3D extruder needed a hobbed bolt so a good opportunity to make one up. Before starting I made a simple jig to hold the bolt to b...

Sunday, 4 January 2015

Bowden tube Extruder fabrication

I was thinking of designing my own extruder but rather than reinventing the wheel I opted for one designed by the guys at Infill 3D . I us...

Thursday, 1 January 2015

Putting it all together

With some time off work it would be a good time to fabricate the frame parts and put it all together. The BOM so far is as follows: ...

View web version

About Me

d3delta3d

View my complete profile

Powered by Blogger.